MAN F2000 32.414
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAN F2000 32.414
Choose a car by KBA.
MAN F2000 32.414
Choose an engine.
Spare parts MAN F2000 32.414
Thread Size 1: | M15x2x198 |
Thread Size 2: | M15x2x259,5 |
Bolt Head-/Nut Design: | Male Torx |
Spanner Size: | TX - E 20 |
Number of bolts/screws: | 6 |
Warehouse: | 2 pcs |
Warehouse: | 3 pcs |
Supplementary Article/Supplementary Info: | with crankshaft seal |
Warehouse: | 1 pcs |
Water Pump Type: | for gear drive |
Fitting Position: | engine sided |
Warehouse: | 1 pcs |
Warehouse: | 19 pcs |
Inner Diameter [mm]: | 120 mm |
Outer Diameter [mm]: | 140 mm |
Height [mm]: | 13 mm |
Radial Shaft Seal Design: | AW/BS |
Swirl Type: | Left-hand Twist |
Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
Dust Cover: | with dust lip |
Additionally required articles (article numbers): | 834.289 |
Observe mounting information: | yes |
Supplementary Article/Info 2: | with mounting sleeve |
Installation Information: | Mounting dry and without any additional oil and grease |
Warehouse: | 6 pcs |
Inner Diameter [mm]: | 105 mm |
Outer Diameter [mm]: | 130 mm |
Height [mm]: | 12 mm |
Radial Shaft Seal Design: | AW/BS |
Swirl Type: | Right-hand Twist |
Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
Dust Cover: | with dust lip |
Additionally required articles (article numbers): | 834.270 |
Observe mounting information: | yes |
Supplementary Article/Info 2: | with mounting sleeve |
Installation Information: | Mounting dry and without any additional oil and grease |
Warehouse: | 9 pcs |
Valve Stem Diameter [mm]: | 9 mm |
Inner Diameter [mm]: | 12 mm |
Outer Diameter [mm]: | 15,4 mm |
Height [mm]: | 11 mm |
Material: | FPM (fluoride rubber) |
Warehouse: | > 25 pcs |
Fitting Position: | frontal sided |
Warehouse: | 9 pcs |
Oil Sump Material: | Sheet Steel |
Warehouse: | 1 pcs |
Quantity Unit: | Pair |
Surface: | Galvanically coated |
For bearing clearance from [mm]: | 0,0600 mm |
To bearing clearance [mm]: | 0,1260 mm |
For housing diameter from [mm]: | 111,0 mm |
To housing diameter [mm]: | 111,022 mm |
Width from [mm]: | 35,80 mm |
Width to [mm]: | 35,95 mm |
For wall thickness from [mm]: | 3,466 mm |
To wall thickness [mm]: | 3,478 mm |
For shaft diameter from [mm]: | 103,98 mm |
To shaft diameter [mm]: | 104,0 mm |
Packaging height [cm]: | 13,46 cm |
Packaging width [cm]: | 3,96 cm |
Net Weight [g]: | 305 g |
Packaging length [cm]: | 8,2 cm |
Warehouse: | 7 pcs |
Thickness [mm]: | 0,5 mm |
Inner Diameter [mm]: | 20 mm |
Outer Diameter [mm]: | 30 mm |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Warehouse: | 6 pcs | |
Supplier: | > 3 pcs |