MAN F2000 26.414
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAN F2000 26.414
Choose a car by KBA.
MAN F2000 26.414
Choose an engine.
Spare parts MAN F2000 26.414
015.920 - ELRING Cylinder Head Bolt Set
We recommend!General information
Code: | 015.920 |
Brand: | ELRING |
Title: | Cylinder Head Bolt Set |
Car: | MAN TGA Neoplan Bus Centroliner Cityliner Tourliner Trendliner Van Hool D2840LE* D2842LE* D2848LE* D2866LF* D2876LE* D2876LF* D2876LOH* D2866LOH* D2866LUH* |
Weight : | 1,85 kg |
Criteria
Thread Size 1: | M15x2x198 |
Thread Size 2: | M15x2x259,5 |
Bolt Head-/Nut Design: | Male Torx |
Spanner Size: | TX - E 20 |
Number of bolts/screws: | 6 |
Warehouse: | 14 pcs |
123.410 - ELRING Gasket, cylinder head cover
We recommend!Warehouse: | 6 pcs |
123.420 - ELRING Gasket, cylinder head cover
We recommend!Warehouse: | 5 pcs |
Warehouse: | 1 pcs |
746.793 - ELRING Gasket, water pump
We recommend!Warehouse: | 1 pcs |
Warehouse: | 19 pcs |
766.853 - ELRING Shaft Seal, crankshaft
We recommend!General information
Code: | 766.853 |
Brand: | ELRING |
Title: | Shaft Seal, crankshaft |
Car: | MAN |
Weight : | 0,11 kg |
Criteria
Inner Diameter [mm]: | 105 mm |
Outer Diameter [mm]: | 130 mm |
Height [mm]: | 12 mm |
Radial Shaft Seal Design: | AW/BS |
Swirl Type: | Right-hand Twist |
Material: | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
Dust Cover: | with dust lip |
Additionally required articles (article numbers): | 834.270 |
Observe mounting information: | yes |
Supplementary Article/Info 2: | with mounting sleeve |
Installation Information: | Mounting dry and without any additional oil and grease |
Warehouse: | 8 pcs |
814.882 - ELRING Seal Ring, valve stem
We recommend!Warehouse: | > 25 pcs |
845.541 - ELRING Gasket, oil sump
We recommend!Warehouse: | 1 pcs |
General information
Code: | 001HL10220000 |
Brand: | MAHLE |
Title: | Crankshaft Bearing |
Car: | MERCEDES |
Weight : | 0,34 kg |
Criteria
Quantity Unit: | Pair |
Surface: | Galvanically coated |
For bearing clearance from [mm]: | 0,0600 mm |
To bearing clearance [mm]: | 0,1260 mm |
For housing diameter from [mm]: | 111,0 mm |
To housing diameter [mm]: | 111,022 mm |
Width from [mm]: | 35,80 mm |
Width to [mm]: | 35,95 mm |
For wall thickness from [mm]: | 3,466 mm |
To wall thickness [mm]: | 3,478 mm |
For shaft diameter from [mm]: | 103,98 mm |
To shaft diameter [mm]: | 104,0 mm |
Packaging height [cm]: | 13,46 cm |
Packaging width [cm]: | 3,96 cm |
Net Weight [g]: | 305 g |
Packaging length [cm]: | 8,2 cm |
Warehouse: | 7 pcs |