CITROËN JUMPY II Platform/Chassis 1.6 HDi 90 16V
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CITROËN JUMPY II Platform/Chassis 1.6 HDi 90 16V
Choose a car by KBA.
CITROËN JUMPY II Platform/Chassis 1.6 HDi 90 16V
Choose an engine.
Spare parts CITROËN JUMPY II Platform/Chassis 1.6 HDi 90 16V
Fitting Position: | High Pressure Pump (low pressure side) |
Warehouse: | > 25 pcs |
Opening Temperature [°C]: | 83 °C |
Warehouse: | 19 pcs |
Filter type: | In-Line Filter |
Filter type: | without filter heating |
Outer Diameter 1 [mm]: | 110 mm |
Height [mm]: | 122 mm |
Outlet Ø [mm]: | 10 mm |
Thread Size: | 10 |
General Information: | includes components OE |
Warehouse: | 1 pcs | |
Warehouse 2 (+3 days): | > 25 pcs |
Supplementary Article/Supplementary Info: | with bearings |
Warehouse: | 1 pcs | |
Warehouse 2 (+3 days): | 1 pcs |
Standard Size [STD]: | yes |
Quantity Unit: | Set |
Warehouse: | 9 pcs |
Oversize [mm]: | 0,3 mm |
Quantity Unit: | Set |
Warehouse: | > 25 pcs |
Standard Size [STD]: | yes |
Warehouse: | 3 pcs |
Supplementary Article/Supplementary Info: | with gaskets/seals |
Warehouse: | 4 pcs | |
Warehouse 2 (+3 days): | > 25 pcs |
Operating Mode: | Hydraulic |
Thickness [mm]: | 33,4 mm |
Outer Diameter [mm]: | 12 mm |
Length [mm]: | 34,5 mm |
Fitting Position: | Exhaust Side |
Fitting Position: | Intake Side |
Warehouse: | 1 pcs | |
Supplier: | > 25 pcs |
Length [mm]: | 136,8 mm |
Diameter of large connecting rod big end [mm]: | 50,655 mm |
Dia. of small connecting rod big end (with bushing) [mm]: | 26,007 mm |
Connecting Rod Design: | Trapezoidal Connecting Rod |
Warehouse: | 3 pcs | |
Supplier: | > 25 pcs |
Component Number: | 72456600 |
Component Number: | 72457600 |
Standard Size [STD]: | yes |
Quantity Unit: | Set |
Version: | Without locating lug |
General Information: | The upper shell is marked with `SPUTTER`. with e.g.r. holes sensor thread ventilation holes - 3 times higher cycle life - Optimised for partial state of charge operations - Ideal for small to mid-sized cars with Start-Stop and othe r fuel-saving features Made in Europe |
Warehouse: | 3 pcs | |
Supplier: | > 25 pcs |
Operating Mode: | Mechanical |
Water pump impeller material: | Plastic |
Number of blades/vanes: | 19 |
Supplementary Article/Supplementary Info: | with gasket/seal |
Supplementary Article/Info 2: | with fastening material |
Warehouse: | 1 pcs | |
Supplier: | > 25 pcs |