RENAULT CLIO III (BR0/1, CR0/1) 1.5 dCi
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
RENAULT CLIO III (BR0/1, CR0/1) 1.5 dCi
Choose a car by KBA.
RENAULT CLIO III (BR0/1, CR0/1) 1.5 dCi
Choose an engine.
Spare parts RENAULT CLIO III (BR0/1, CR0/1) 1.5 dCi
Opening Temperature [°C]: | 83 °C |
Housing Type: | with housing |
Supplementary Article/Supplementary Info: | with gasket/seal |
Warehouse: | 18 pcs |
Standard Size [STD]: | yes |
Quantity Unit: | Set |
Warehouse: | > 25 pcs |
Oversize [mm]: | 0,25 mm |
Quantity Unit: | Set |
Warehouse: | 7 pcs |
Oversize [mm]: | 0,5 mm |
Quantity Unit: | Set |
Warehouse: | > 25 pcs |
Standard Size [STD]: | yes |
Warehouse: | > 25 pcs |
Oversize [mm]: | 0,25 mm |
Warehouse: | > 25 pcs |
Oversize [mm]: | 0,5 mm |
Warehouse: | 15 pcs |
Full Set: | yes |
Component Number: | LH002600 |
Component Number: | LP002600 |
Warehouse: | > 25 pcs |
Hole Spacing [mm]: | 96,94 mm |
Tightening Torque [Nm]: | 60 Nm |
Machining: | Forged |
Machining: | cracked |
Connecting Rod Design: | Trapezoidal Connecting Rod |
Diameter of large connecting rod big end [mm]: | 47,6 mm |
Dia. of small connecting rod big end (with bushing) [mm]: | 26 mm |
Warehouse: | 4 pcs | |
Supplier: | 23 pcs |
Cylinder Bore [mm]: | 76 mm |
Recess Depth 1 [mm]: | 13,5 mm |
Compression Height [mm]: | 41,7 mm |
Standard Size [STD]: | yes |
Recess Diameter [mm]: | 47 mm |
Warehouse: | 9 pcs |
Number of Teeth: | 22 |
Warehouse: | 5 pcs |
Engine Timing: | Timing Belt |
Number of Teeth: | 40 |
Outer Diameter [mm]: | 120 mm |
Warehouse: | > 25 pcs |