BMW N52 B30 AE
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
BMW N52 B30 AE
Choose a car by KBA.
BMW N52 B30 AE
Choose an engine.
Spare parts BMW N52 B30 AE
Length [mm]: | 56 mm |
Thread Size: | 42 |
Thread Size: | M9 |
Quantity: | 2 |
General Information: | ET Engineteam connecting rod bolts are not compatible with OE connecting rods. The bolts can only be used with ET Engineteam connecting rods, part numbers OM0036, OM0046, OM0060, OM0066 and OM0078. |
Warehouse: | > 25 pcs |
Warehouse: | > 25 pcs |
Hole Spacing [mm]: | 106,5 mm |
Tightening Torque [Nm]: | 60 Nm |
Machining: | Forged |
Machining: | cracked |
Connecting Rod Design: | Trapezoidal Connecting Rod |
Diameter of large connecting rod big end [mm]: | 53,6 mm |
Dia. of small connecting rod big end (with bushing) [mm]: | 22 mm |
Warehouse: | > 25 pcs |
Standard Set: | yes |
Hole Spacing [mm]: | 106,5 mm |
Tightening Torque [Nm]: | 60 Nm |
Machining: | Forged |
Machining: | cracked |
Connecting Rod Design: | Trapezoidal Connecting Rod |
Pin Diameter [mm]: | 22 mm |
Weight [g]: | 575 g |
Warehouse: | 5 pcs |
Supplementary Article/Supplementary Info: | with gaskets/seals |
Supplementary Article/Info 2: | with bolts |
Warehouse: | 7 pcs | |
Warehouse 2 (+3 days): | 10 pcs |
Operating Mode: | Hydraulic |
Outer Diameter [mm]: | 12 mm |
Length [mm]: | 34,5 mm |
Fitting Position: | Exhaust Side |
Fitting Position: | Intake Side |
Warehouse: | 24 pcs | |
Supplier: | > 25 pcs |
Cylinder Bore [mm]: | 85 mm |
Component Number: | 66435 |
Component Number: | 66436 |
Component Number: | 66437 |
Standard Size [STD]: | yes |
Warehouse: | 4 pcs | |
Supplier: | > 25 pcs |
Inner Diameter [mm]: | 12 mm |
Outer Diameter [mm]: | 17 mm |
Thickness [mm]: | 1,5 mm |
Material: | Copper |
Shape: | A Shape |
DIN/ISO: | 7603 |
Alternative Repair Kit: | 017.736 |
Alternative Repair Kit: | 505.550 |
Alternative Repair Kit: | 505.540 |
Warehouse: | 12 pcs |
Inner Diameter [mm]: | 7,52 mm |
Thickness [mm]: | 3,5 mm |
Material: | FPM (fluoride rubber) |
Shape: | O-Ring |
Warehouse: | 2 pcs |
Valve Head Diameter [mm]: | 29 mm |
Valve Stem Diameter [mm]: | 6 mm |
Length [mm]: | 110,6 mm |
Material: | Bi-metal |
Valve seat angle [°]: | 45 ° |
Supplementary Article/Info 2: | Valve stem tip hardened |
Valve Seat Material: | Bi-metal |
Warehouse: | 1 pcs | |
Supplier: | > 25 pcs |
Outer Diameter [mm]: | 10,04 mm |
Bore Diameter [mm]: | 5 mm |
Length [mm]: | 42 mm |
Valve type: | for inlet valves |
Warehouse: | 6 pcs | |
Supplier: | > 25 pcs |
Outer Diameter [mm]: | 10,15 mm |
Bore Diameter [mm]: | 5 mm |
Length [mm]: | 42 mm |
Valve type: | for inlet valves |
Oversize: | yes |
Warehouse: | 4 pcs | |
Supplier: | > 25 pcs |