Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
Items for cross-reference number 038103603M
Warehouse: | 1 pcs | |
Supplier: | > 5 pcs |
General information
Code: | SU0030VR1 |
Brand: | ET ENGINETEAM |
Title: | Oil Sump + sealing compound |
Car: | Audi Seat Skoda VW TT A3 Leon Toledo Octavia Bora Golf New Beetle AGN AUM 1,8 T 2000+ |
Weight : | 3,00 kg |
Criteria
Supplementary Article/Supplementary Info: | with gasket/seal |
General Information: | includes components ET Engineteam + Elring |
Warehouse: | 1 pcs |
General information
Code: | BMO-VW-000 |
Brand: | NTY |
Title: | Oil Sump |
Car: | VW GOLF IV 1.8T 97-05, AUDI A3 1.8T -03, TT 1.8T -06, SKODA OCTAVIA 1.8T -10, SEAT LEON 1.8T -06 /W/O HOLE FOR OIL SENSOR/ |
Weight : | 2,48 kg |
Criteria
Supplementary Article/Info 2: | without bore for oil level sensor |
Fabrication Number: | BMO-VW-000 |
General information
Code: | BMO-VW-003 |
Brand: | NTY |
Title: | Oil Sump |
Car: | VW GOLF IV 1.8T 97-05, AUDI A3 1.8T -03, TT 1.8T -06, SKODA OCTAVIA 1.8T -10, SEAT LEON 1.8T -06 /WITH HOLE FOR OIL SENSOR/ |
Weight : | 2,44 kg |
Criteria
Supplementary Article/Info 2: | with bore for oil-level sensor |
Fabrication Number: | BMO-VW-003 |
General information
Code: | V10-0426 |
Brand: | VAICO |
Title: | Oil Sump |
Car: | ŠKODA-VW |
Weight : | 0,00 kg |
Criteria
Width [mm]: | 280,0 mm |
Observe the vehicle manufacturer specifications: | yes |
Height [mm]: | 125 mm |
Section: | Lower Section |
Supplementary Article/Supplementary Info: | with oil drain plug |
Supplementary Article/Supplementary Info: | without gasket/seal |
See accessories list for additionally required parts: | yes |
Forward- /Backflow: | with backflow |
Oil Sump Material: | Aluminium |
Observe system fill quantity: | yes |
Length [mm]: | 430 mm |
Supplementary Article/Info 2: | without bore for oil level sensor |
Weight [kg]: | 2,881 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |