Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 25300
General information
Code: | 25300 |
Brand: | TRW Engine Component |
Title: | Intake Valve |
Car: | MAN |
Weight : | 0,15 kg |
Criteria
Valve head diameter [mm]: | 46 mm |
Valve stem diameter [mm]: | 9 mm |
Length [mm]: | 153,8 mm |
Material: | Bi-metal |
Supplementary Article/Info 2: | Chromed valve stem |
Valve seat angle [°]: | 30 ° |
Supplementary Article/Info 2: | Valve stem tip hardened |
Valve Seat Material: | Bi-metal |
Show all
Show less
General information
Code: | 227VE30910000 |
Brand: | MAHLE |
Title: | Intake Valve |
Car: | MAN |
Weight : | 0,17 kg |
Criteria
Fitting Position: | Intake Side |
Valve head diameter [mm]: | 46,0 mm |
Valve stem diameter [mm]: | 9,0 mm |
Valve seat angle [°]: | 30,0 ° |
Length [mm]: | 153,7 mm |
Valve Seat Material: | Chrome-Mangan-Nickel Steel |
Surface: | Chromed |
Net Weight [g]: | 157 g |
Packaging height [cm]: | 17,00 cm |
Packaging length [cm]: | 5,2 cm |
Packaging width [cm]: | 5,20 cm |
Show all
Show less
Netto price:
£20.64
(£20.64 without VAT 0%)
Your price:
-30%
£14.45
(£14.45 without VAT 0%)
Warehouse: | 0 pcs | |
Supplier: | Check |
General information
Code: | 302015100272 |
Brand: | MAGNETI MARELLI |
Title: | Joint Kit, drive shaft |
Car: | SUZUKI |
Weight : | 1,84 kg |
Criteria
Fitting Position: | Front Axle |
Length [mm]: | 61 mm |
External Toothing wheel side: | 25 |
External Toothing differential side: | 29 |
Seal Diameter [mm]: | 49 mm |
Specification: | BELL PIN LENGTH - 82 |
Show all
Show less
General information
Code: | FE178935 |
Brand: | FEBI BILSTEIN |
Title: | Intake Valve |
Car: | MAN |
Weight : | 0,15 kg |
Criteria
Length [mm]: | 155 mm |
Valve head diameter [mm]: | 46 mm |
Valve stem diameter [mm]: | 9 mm |
Notches/Holes Number: | 3 |
Weight [kg]: | 0,148 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE24328 |
Brand: | FEBI BILSTEIN |
Title: | Belt Tensioner, V-ribbed belt |
Car: | VOLVO |
Weight : | 1,03 kg |
Criteria
Width of castor bearing surface [mm]: | 24 mm |
Housing material: | Aluminium |
Track rollers material: | Metal |
Outer Diameter [mm]: | 76 mm |
Operating Mode: | Automatic |
Weight [kg]: | 1,028 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE25300 |
Brand: | FEBI BILSTEIN |
Title: | Guide, timing chain |
Car: | MERCEDES |
Weight : | 0,15 kg |
Criteria
Engine Timing: | Timing Chain |
Weight [kg]: | 0,15 kg |
For OE number: | 111 050 11 16 |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | HOF25300 |
Brand: | HOFFER |
Title: | Repair Kit, cable set |
Car: | OPEL |
Weight : | 0,10 kg |
Criteria
Length [mm]: | 200 mm |
Number of pins: | 11 -pin connector |
Cable insulation material: | Silicone |
Number of circuits: | 11 |
Supplementary Article/Info 2: | with bellow |
Fitting Position: | Right Rear |
Fitting Position: | Left Rear |
Fitting Position: | Vehicle Door |
Comfort Equipment Variant (trim package): | for vehicles with central locking |
Show all
Show less
General information
Code: | R6331/BMCR |
Brand: | FRECCIA |
Title: | Intake Valve |
Car: | MAN |
Weight : | 0,17 kg |
Criteria
Valve head diameter [mm]: | 46 mm |
Valve stem diameter [mm]: | 9 mm |
Length [mm]: | 153,6 mm |
Valve seat angle [°]: | 30 ° |
Supplementary Article/Info 2: | Chromed valve stem |
Material: | Bi-metal |
Valve Seat Material: | Chrome-Mangan-Nickel Steel |
Valve stem material: | Chrome-silicon-steel |
Connector type: | I |
Show all
Show less
General information
Code: | V30-10006-BEK |
Brand: | VAICO |
Title: | Timing Chain Kit |
Car: | MERCEDES |
Weight : | 0,00 kg |
Criteria
Supplementary Article/Info 2: | for camshaft |
Chain Type: | Duplex |
Chain Type: | with chain lock |
Timing Chain Size: | D67ZN |
Fitting Position: | engine sided |
Slim Set: | yes |
Number of chain links: | 126 |
Weight [kg]: | 1,7718 kg |
Supplementary Article/Supplementary Info: | with slide rails |
Supplementary Article/Supplementary Info: | with chain tensioner |
General Information: | VAICO Timing chain kits are exclusively manufactured with GENUINE chains (Q+, original equipment manufacturer quality) |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less