Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 52186
General information
Code: | FE183671 |
Brand: | FEBI BILSTEIN |
Title: | Mounting, engine |
Car: | FIAT |
Weight : | 1,65 kg |
Criteria
Fitting Position: | Right |
Mounting Type: | Rubber-Metal Mount |
Weight [kg]: | 1,647 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
0204103530 - BOSCH Brake Caliper
Remanufactured partGeneral information
Code: | 0204103530 |
Brand: | BOSCH |
Title: | Brake Caliper |
Car: | FIAT |
Weight : | 2,48 kg |
Criteria
Service exchange part: | yes |
Piston Diameter [mm]: | 54 mm |
Inner width [mm]: | 55 mm |
Material: | Cast Iron |
Brake Caliper Type: | Floating Caliper |
Paired article number: | 0 204 103 531 |
Article number of recommended accessories: | 1 987 470 612 |
Show all
Show less
General information
Code: | V10-1664 |
Brand: | VAICO |
Title: | Spring Seat |
Car: | ŠKODA-VW |
Weight : | 0,00 kg |
Criteria
Inner Diameter [mm]: | 22 mm |
Outer Diameter [mm]: | 92 mm |
Fitting Position: | Upper |
Fitting Position: | Front Axle |
Weight [kg]: | 0,144 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less