Vyhledat podle vozidla
Vyhledat podle KBA
Vyhledat podle motoru
Vyberte výrobce, model a typ motoru. Díky tomu bude moci náš systém najít díly pro Vaše vozidlo.
Vyberte si auto podle KBA.
Vyberte motor.
Zobrazit vyhledávání
Skrýt vyhledávání
Položky pro referenční číslo 1112901700
Základní údaje
Kód: | BMO-VW-012 |
Značka: | NTY |
Název: | Olejová vana |
Doplňkový název: | Vana olejová |
Vozidlo: | VW GOLF IV/V 1.4 16V, 1.6 16V 97-06, POLO 1.4 16V 02-09, SKODA FABIA 1.4 16V 99-08, OCTAVIA 1.4 16V 00-10, SEAT CORDOBA/IBIZA 1.4 16V 02-09 /WITH HOLE FOR OIL SENSOR/ |
Hmotnost : | 2,32 kg |
Vlastnosti
Doplňující výrobek/info 2: | s vývrtem pro snímač stavu oleje |
Výrobní číslo: | BMO-VW-012 |
Základní údaje
Kód: | V10-0449 |
Značka: | VAICO |
Název: | Olejová vana |
Doplňkový název: | Vana olejová 1,4i |
Vozidlo: | VW |
Hmotnost : | 0,00 kg |
Vlastnosti
Část: | spodní část |
Materiál olejové vany: | hliník |
Doplňující výrobek/info 2: | s vývrtem pro snímač stavu oleje |
Doplňkový potřebný díl - viz seznam příslušenství: | ano |
Šířka [mm]: | 235,0 mm |
Montovaná strana: | Olejová vana |
Výška [mm]: | 155 mm |
Doplňkový výrobek/ doplňkové info: | se šroubem k vypuštění oleje |
Dbát zadání výrobce vozidla: | ano |
Dbát na objem náplně systému: | ano |
Délka [mm]: | 420 mm |
Doplňující výrobek/info 2: | s těsnicím kroužkem |
Doplňující výrobek/info 2: | bez těsnění olejové vany |
Hmotnost [kg]: | 2,422 kg |
Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně